Welcome to Shandong Xinqiujing Metal Material Co., Ltd.

Tel : +8617353827712 Email：sdxinqiujing@sdxinqiujing.com

language

English

Home page

PRODUCT CENTER

6061 T6 Mirror Aluminum Coil

Category:

Mirror aluminum coil

6061 T6 Mirror Aluminum Coil is a metal material made of aluminum alloy material. It has advantages such as good weather resistance, wear resistance, and corrosion resistance; And the surface has undergone polishing treatment, which has good decorative effect and tactile performance, and is widely used in external insulation engineering of building walls.

MESSAGE

Send Email To Me

Keyword :

Mirror aluminum coil

Tips for using mirror aluminum coils:
1. Choose the appropriate size:
Determine the area size and thickness of the required mirror panel based on the actual situation of the construction site and design requirements (such as increasing the number of panels when the area is large). Commonly used ones are 1.5m × 2.5mm、2 m × 2 mm、3 m × 3 mm、4 m × Products with different thicknesses such as 5mm, 5 m * 6mm, 6 m * 10 mm, 7 m/12mm, 8 M/16MM, 10 M/20mm, etc. are available for users to choose from.
2. Pay attention to the selection of installation method:
Before pasting ceramic tiles or stones on the wall base, snap lines and take protective measures to prevent damage to the wall structural layer and waterproof layer. At the same time, ensure the flatness and aesthetics of the surface to avoid hollowing. If the mirror panel is directly attached to a concrete wall, it is important to clean the substrate and fix it with special adhesive. If you are directly applying glue to the cement mortar wall and then pasting the lens, you need to treat the base layer before pasting.
3. Reasonably arrange the construction period:
Due to the fact that mirrors belong to special building materials, professional operators are required to carry out operations to ensure optimal quality without affecting normal progress. In addition, it is also necessary to consider the loss caused during transportation to reduce the cost of the product.
4. Control the construction temperature well:
Generally speaking, high and dry summer temperatures can easily lead to problems such as rapid evaporation of water, dry cracking, and deformation. Therefore, it is not advisable to lay mirror aluminum panels on a large area under high temperature conditions. Generally, sunshades should be set up in cool indoor areas to maintain good ventilation and facilitate natural weathering of materials. In winter, heating devices need to be installed outdoors to increase room temperature to ensure the smooth formation and solidification of mirror panels. At the same time, corresponding insulation and antifreeze measures should be taken in low-temperature environments to ensure that product quality is not affected.
5. Strengthen the protection and maintenance of finished products:
For finished mirror aluminum panels, regular inspections should be conducted to check for any damage or damage to avoid unnecessary losses. In addition, it is necessary to regularly wipe the dust and stains on the surface to prevent contamination of the paint film and its loss of luster.

Thickness	0.2-400mm，etc	Length:	100-12000mm，or as required
Width	20-3000mm，etc	Standard:	ASTM，AISI，JIS，GB， DIN，EN
Certification:	ISO, SGS，BV
Surface finish	mill,bright,polished,hair line,brush,sand Blast,checkered,embossed,etching,etc
Grade	1000 Series: 1050 1060 1070 1100 1200 1235 etc.
	3000 Series: 3003 3004 3005 3104 3105 3A21 etc.
	5000 Series: 5005 5052 5083 5086 5154 5182 5251 5754 etc.
	6000 Series: 6061 6063 6082 6A02 etc.
	7000 Series: 7050 7475 7075 etc.
Temper	H12,H14,H16,H18,H20,H22,H24,H26,H28,H32,H36,H38,HO,H111,H112,H114,H116,H118,H321.
Payment Terms	T/T, L/C at sight,West Union	Loading port	any port in China
Packing	standard export packing (inside:water proof paper,outside:steel covered with strips and pallets)
Container size	20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)
	40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)
	40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High)

Warehouse storage

Our products has been wildly sold to Northeast, North China, East China, Europe, Middle East, Southeast Asia, Australia and ect...Total area of our cooperation factory is approximately 58, 000 square meters, and registered capital is RMB 10 million Yuan, and fixed assets is RMB 50 million Yuan.

Packaging and shipping

The company specializes in selling aluminum products, and the best-selling products include aluminum sheets, aluminum coils, aluminum rods, aluminum tubes, aluminum foils, etc. Product performance indicators have reached the domestic advanced level. Products have been widely sold to Europe, Asia, South America, Africa, North America, Oceania, etc.

Customer communication

With the strategic thought of striving for survival on the basis of quality and development on the basis of benefit, adhering to management idea of "faith, practical, innovation, and development", we have courage to challenge, and keep continuous innovation in the competition.

Application area

We also do our unremitting efforts to fight bravely for creating a national brand and international brand. Holding to the intellectual businessman of style and the spirit of sincerity, all staff of our company are willing to cooperate and develop together with you.

Certificate of honor

Take the lead in developing a large number of high-quality new aluminum alloy materials represented by aluminum profiles for metro vehicles, aluminum plate for cans, aluminum plate base for printing, and all aluminum household products exported to more than 40 countries and regions such as Europe and America. Haihengxin has become an internationally influential Chinese aluminum processing brand.

Mirror aluminum coil